Bourne Again Shell Bash Prompt to Start New Session

Shell scripting is an important part of process automation in Linux. Scripting helps you write a sequence of commands in a file and then execute them.

This saves you time because you don't have to write certain commands again and again. You can perform daily tasks efficiently and even schedule them for automatic execution.

You can also set certain scripts to execute on startup such as showing a particular message on launching a new session or setting certain environment variables.

The applications and uses of scripting are numerous, so let's dive in.

In this article, you will learn:

1. What is a bash shell?
2. What is a bash script and how do you identify it?
3. How to create your first bash script and execute it.
4. The basic syntax of shell scripting.
5. How to see a system's scheduled scripts.
6. How to automate scripts by scheduling via cron jobs.

The best way to learn is by practicing. I highly encourage you to follow along using Replit. You can access a running Linux shell within minutes.

Introduction to the Bash Shell

The Linux command line is provided by a program called the shell. Over the years, the shell program has evolved to cater to various options.

Different users can be configured to use different shells. But most users prefer to stick with the current default shell. The default shell for many Linux distros is the GNU Bourne-Again Shell (bash). Bash is succeeded by Bourne shell (sh).

When you first launch the shell, it uses a startup script located in the .bashrc or .bash_profile file which allows you to customize the behavior of the shell.

When a shell is used interactively, it displays a $ when it is waiting for a command from the user. This is called the shell prompt.

[username@host ~]$

If shell is running as root, the prompt is changed to #. The superuser shell prompt looks like this:

[root@host ~]#

Bash is very powerful as it can simplify certain operations that are hard to accomplish efficiently with a GUI. Remember that most servers do not have a GUI, and it is best to learn to use the powers of a command line interface (CLI).

What is a Bash Script?

A bash script is a series of commands written in a file. These are read and executed by the bash program. The program executes line by line.

For example, you can navigate to a certain path, create a folder and spawn a process inside it using the command line.

You can do the same sequence of steps by saving the commands in a bash script and running it. You can run the script any number of times.

How Do You Identify a Bash Script?

File extension of .sh.

By naming conventions, bash scripts end with a .sh. However, bash scripts can run perfectly fine without the sh extension.

Scripts start with a bash bang.

Scripts are also identified with a shebang. Shebang is a combination of bash # and bang ! followed the the bash shell path. This is the first line of the script. Shebang tells the shell to execute it via bash shell. Shebang is simply an absolute path to the bash interpreter.

Below is an example of the shebang statement.

          #! /bin/bash        

The path of the bash program can vary. We will see later how to identify it.

Execution rights

Scripts have execution rights for the user executing them.

An execution right is represented by x. In the example below, my user has the rwx (read, write, execute) rights for the file test_script.sh

File colour

Executable scripts appear in a different colour from rest of the files and folders.

In my case, the scripts with execution rights appear as green.

How to Create Your First Bash Script

Let's create a simple script in bash that outputs Hello World.

Create a file named hello_world.sh

          touch hello_world.sh        

Find the path to your bash shell.

          which bash        

In my case, the path is /usr/bin/bash and I will include this in the shebang.

Write the command.

We will echo "hello world" to the console.

Our script will look something like this:

          #! usr/bin/bash echo "Hello World"        

Edit the file hello_world.sh using a text editor of your choice and add the above lines in it.

Provide execution rights to your user.

Modify the file permissions and allow execution of the script by using the command below:

          chmod u+x hello_world.sh        

chmod modifies the existing rights of a file for a particular user. We are adding +x to user u.

Run the script.

You can run the script in the following ways:

./hello_world.sh

bash hello_world.sh.

Here's the output:

Two ways to run scripts

The Basic Syntax of Bash Scripting

Just like any other programming language, bash scripting follows a set of rules to create programs understandable by the computer. In this section, we will study the syntax of bash scripting.

How to define variables

We can define a variable by using the syntax variable_name=value. To get the value of the variable, add $ before the variable.

          #!/bin/bash # A simple variable example greeting=Hello name=Tux echo $greeting $name                  

Tux is also the name of the Linux mascot, the penguin.

Hi, I am Tux.

Arithmetic Expressions

Below are the operators supported by bash for mathematical calculations:

Operator	Usage
+	addition
-	subtraction
*	multiplication
/	division
**	exponentiation
%	modulus

Let's run a few examples.

Note the spaces, these are part of the syntax

Numerical expressions can also be calculated and stored in a variable using the syntax below:

var=$((expression))

Let's try an example.

          #!/bin/bash  var=$((3+9)) echo $var                  

Fractions are not correctly calculated using the above methods and truncated.

For decimal calculations, we can use bc command to get the output to a particular number of decimal places. bc (Bash Calculator) is a command line calculator that supports calculation up to a certain number of decimal points.

echo "scale=2;22/7" | bc

Where scale defines the number of decimal places required in the output.

Getting output to 2 decimal places

How to read user input

Sometimes you'll need to gather user input and perform relevant operations.

In bash, we can take user input using the read command.

          read variable_name        

To prompt the user with a custom message, use the -p flag.

read -p "Enter your age" variable_name

Example:

          #!/bin/bash  echo "Enter a numner" read a  echo "Enter a numner" read b  var=$((a+b)) echo $var                  

Numeric Comparison logical operators

Comparison is used to check if statements evaluate to true or false. We can use the below shown operators to compare two statements:

Operation	Syntax	Explanation
Equality	num1 -eq num2	is num1 equal to num2
Greater than equal to	num1 -ge num2	is num1 greater than equal to num2
Greater than	num1 -gt num2	is num1 greater than num2
Less than equal to	num1 -le num2	is num1 less than equal to num2
Less than	num1 -lt num2	is num1 less than num2
Not Equal to	num1 -ne num2	is num1 not equal to num2

Syntax:

          if [ conditions ]     then          commands fi        

Example:

Let's compare two numbers and find their relationship:

          read x read y  if [ $x -gt $y ] then echo X is greater than Y elif [ $x -lt $y ] then echo X is less than Y elif [ $x -eq $y ] then echo X is equal to Y fi                  

Output:

Conditional Statements (Decision Making)

Conditions are expressions that evaluate to a boolean expression (true or false). To check conditions, we can use if, if-else, if-elif-else and nested conditionals.

The structure of conditional statements is as follows:

• if...then...fi statements
• if...then...else...fi statements
• if..elif..else..fi
• if..then..else..if..then..fi..fi.. (Nested Conditionals)

Syntax:

          if [[ condition ]] then 	statement elif [[ condition ]]; then 	statement  else 	do this by default fi        

To create meaningful comparisons, we can use AND -a and OR -o as well.

The below statement translates to: If a is greater than 40 and b is less than 6.

if [ $a -gt 40 -a $b -lt 6 ]

Example: Let's find the triangle type by reading the lengths of its sides.

          read a read b read c  if [ $a == $b -a $b == $c -a $a == $c ] then echo EQUILATERAL  elif [ $a == $b -o $b == $c -o $a == $c ] then  echo ISOSCELES else echo SCALENE  fi        

Output:

Test case #1

Test case #2

Test case #3

Looping and skipping

For loops allow you to execute statements a specific number of times.

Looping with numbers:

In the example below, the loop will iterate 5 times.

          #!/bin/bash  for i in {1..5} do     echo $i done        

Looping with strings:

We can loop through strings as well.

          #!/bin/bash  for X in cyan magenta yellow   do 	echo $X done        

While loop

While loops check for a condition and loop until the condition remains true. We need to provide a counter statement that increments the counter to control loop execution.

In the example below, (( i += 1 )) is the counter statement that increments the value of i.

Example:

          #!/bin/bash i=1 while [[ $i -le 10 ]] ; do    echo "$i"   (( i += 1 )) done                  

Reading files

Suppose we have a file sample_file.txt as shown below:

We can read the file line by line and print the output on the screen.

          #!/bin/bash  LINE=1  while read -r CURRENT_LINE 	do 		echo "$LINE: $CURRENT_LINE"     ((LINE++)) done < "sample_file.txt"        

Output:

Lines with line number printed

How to execute commands with back ticks

If you need to include the output of a complex command in your script, you can write the statement inside back ticks.

Syntax:

var= ` commands `

Example: Suppose we want to get the output of a list of mountpoints with tmpfs in their name. We can craft a statement like this: df -h | grep tmpfs.

To include it in the bash script, we can enclose it in back ticks.

          #!/bin/bash  var=`df -h | grep tmpfs` echo $var        

Output:

How to get arguments for scripts from the command line

It is possible to give arguments to the script on execution.

$@ represents the position of the parameters, starting from one.

          #!/bin/bash  for x in $@ do     echo "Entered arg is $x" done        

Run it like this:

./script arg1 arg2

How to Automate Scripts by Scheduling via cron Jobs

Cron is a job scheduling utility present in Unix like systems. You can schedule jobs to execute daily, weekly, monthly or in a specific time of the day. Automation in Linux heavily relies on cron jobs.

Below is the syntax to schedule crons:

          # Cron job example * * * * * sh /path/to/script.sh        

Here, * represent represents minute(s) hour(s) day(s) month(s) weekday(s), respectively.

Below are some examples of scheduling cron jobs.

SCHEDULE	SCHEDULED VALUE
5 0 * 8 *	At 00:05 in August.
5 4 * * 6	At 04:05 on Sunday.
0 22 * * 1-5	At 22:00 on every day-of-week from Monday through Friday.

You can learn about cron in detail in this blog post.

How to Check Existing Scripts in a System

Using crontab

crontab -l lists the already scheduled scripts for a particular user.

My scheduled scripts

Using the find command

The find command helps to locate files based on certain patterns. As most of the scripts end with .sh, we can use the find script like this:

            find . -type f -name "*.sh"          

`

Where,

• . represents the current directory. You can change the path accordingly.
• -type f indicates that the file type we are looking for is a text based file.
• *.sh tells to match all files ending with .sh.

If you are interested to read about the find command in detail, check my other post.

Wrapping up

In this tutorial we learned the basics of shell scripting. We looked into examples and syntax which can help us write meaningful programs.

What's your favorite thing you learned from this tutorial? Let me know on Twitter!

You can read my other posts here.

Work vector created by macrovector - www.freepik.com

Learn to code for free. freeCodeCamp's open source curriculum has helped more than 40,000 people get jobs as developers. Get started

burdittthessom.blogspot.com

Source: https://www.freecodecamp.org/news/shell-scripting-crash-course-how-to-write-bash-scripts-in-linux/

Share this post